Chappee

Chappee Replacement Stove Glass

Chappee Replacement Stove Glass
Chappee replacement stove glass for the Chappee range of wood burning and multifuel stoves are made from heat resistant glass to withstand temperatures of up to 760 degrees. If your model is not listed then please call our help line on 01483 550716 and we will cut your stove glass to the required size.

FREE NEXT DAY DELIVERY

Chappee Replacement Heat Resistant Stove Glass

Dimensions: 273 x 155mm - 4mm Thick

Price: 24.97 (Including VAT at 20%)

Untitled 2

Save 4.99 when you buy 2 pieces of stove glass

10% OFF all Stove Glass Orders

Chappee - 650/670 Single Glaze Replacement Heat Resistant Stove Glass

Dimensions: 321x224mm - 4mm Thick

Price: 46.40 (Including VAT at 20%)

Untitled 2

Save 4.99 when you buy 2 pieces of stove glass

10% OFF all Stove Glass Orders

Chappee Pioneer Replacement Heat Resistant Stove Glass

Dimensions: 280x263mm - 4mm Thick

Price: 46.40 (Including VAT at 20%)

Untitled 2

Save 4.99 when you buy 2 pieces of stove glass

10% OFF all Stove Glass Orders

Chappee Vision 500 Replacement Heat Resistant Stove Glass

Dimensions: 280x263mm - 4mm Thick

Price: 46.40 (Including VAT at 20%)

Untitled 2

Save 4.99 when you buy 2 pieces of stove glass

10% OFF all Stove Glass Orders

Consider the following when replacing your Chappee heat resistant stove glass.

Remove the broken stove glass by loosening the retaining brackets, if the screws are too tight then heating them up with a blow torch will help. It is a good idea to vacuum the door area and then wipe all surfaces with a damp cloth - this will remove debris which can act as a pressure point and can cause the glass to crack (and you thought it was gremlins).
Inspect the thermal rope or tape and replace if damaged. With thermal rope you will need to measure the diameter of the rope or the groove it fits into and use this to order a replacement. If you have tape, then again measure its thickness.
Install the new replacement stove glass and tighten the brackets - friction tight to allow for expansion when the glass gets hot.

Inspect the thermal rope or thermal tape and replace if damaged or worn. Install the new stove glass / heat resistant glass and tighten the brackets only FRICTION TIGHT so to allow for expansion when the glass heats up.

Recently Viewed

Feedback for For Stove Glass - Roy has been compiled from 0 reviews.

DateProductScoreCustomer Comment